Categories: Uncategorized

Shinkai start a new era of cold hydrogenated slurry filtration in polysilicon units

In November, a cold hydrogenation slurry filtration system designed and manufactured by SHINKAI for a polysilicon plant in China was officially started up. The system successfully helped the owner to recover 100% silicon tetra chloride from the viscous slurry with zero energy consumption and zero pollution. After the successful commissioning of the system, it will add tens of millions of dollars of economic benefits to the plant every year, and at the same time greatly reduce the environmental pressure on the polysilicon plant.
At present, the production of polysilicon is dominated by the modified Siemens method and the silane method. Modified Siemens method production process of cold hydrogenation unit of the rapid cooling tower’s bottom will produce a large number of slurries, these slurries are mainly composed of silicon tetra chloride, silica powder, aluminum trichloride, has a high viscosity, easy to slate, corrosive, can not be contacted with the air characteristics, has always been poly-silicon enterprises to deal with the problem. Now most of the enterprises are using dryers or drum filters to deal with these cold hydrogenation slurry, these treatments are not only need long processing time, high energy consumption, and silicon tetra chloride can not be effectively recovered.
SHINKAI has been deeply engaged in the poly-silicon whole process filtration industry for many years, and is the developer and leader of silicon powder filtration solutions. With a deep understanding of the poly-silicon process, and in response to the actual situation and pain points of customers, SHINKAI has developed a set of cold hydrogenation slurry filtration system with a core filter as the core equipment, which can automatically dry, blow back and slag discharge. With low energy consumption and high recovery rate of silicon tetra chloride, it completely solves the problems of cold hydrogenation slurry, which is difficult to handle and easy to cause secondary pollution.
SHINKAI’s filtration systems are widely used in various units of poly-silicon production plants, More Cold Hydrogenation Slurry Filtration Systems, please contact us to get more details.

shinkai

Recent Posts

From Fluidization Science to “Industrial Armor”-Nanjing Shinkai Powder Fluidization Coating Technology

Providing long-term and reliable corrosion protection for metal products has always been a core technological…

3 days ago

The Science of Making Solids “Flow” — Nanjing Shinkai Powder Fluidization & Conveying Technology (Part 2)

Handling powder materials is a fundamental and critical task in industrial production. While powders may…

1 week ago

Powder Fluidization Technology: Nanjing Shinkai’s Game-changer to Solve the Challenges of Conveying Ultra-fine Coal Powder

Introduction Pulverized coal is a micrometer-sized powder produced by pulverized coal. Through pulverization, it achieves rapid and…

2 weeks ago

Filtration Technology for Industrial High-Temperature Gas — Crpss the Core Barrier for Purity and Efficiency

Industrial high-temperature gas filtration technology enables the separation of solids from gases and purification of…

3 weeks ago

Shinkai’s Intelligent Manufacturing: Precise Filtration Leading the Future

An End to High-Risk Filtration Era 1. PEK-C Polyaryl ether ketone (PAEK) is a high-performance…

4 weeks ago

Shinkai’s High-Performance Gas Diffusion Layer: Making Hydrogen Energy Cleaner for You!

IntroductionWith the increasingly severe challenges of global warming and energy security, hydrogen energy is now…

4 weeks ago